In 2026 a 3D printing filament manufacturer based in Southeast Asia placed an order with Friend Plastic Machine (Zhangjiagang Friend Machinery Co., Ltd.) for a 20kg capacity 3D printer filament machine — the FLD-45 single screw PLA filament extruder machine with CE certification. The line was specified for continuous production of 1.75 mm PLA filament feeding the client's own 3D printing consumable brand, with a secondary capability to run ABS, PETG and PA simply by changing the strand die and calibration plates. From deposit to container loading the project was completed in 30 working days, and the line has been running two shifts a day since commissioning at a stable 20–22 kg/h output.
The buyer is a filament and 3D printing consumables supplier serving Southeast Asia's fast-growing desktop 3D printer aftermarket. Their existing single small extruder (around 8 kg/h) could no longer cover demand from local resellers, and outsourced filament was eroding both margin and colour consistency. Their purchasing team set three non-negotiable conditions for the upgrade:
| Parameter | Client Requirement | Friend FLD-45 Solution |
|---|---|---|
| Capacity | 20 kg/h minimum | SJ-45 single screw extruder, 20–22 kg/h on PLA |
| Screw diameter | Industrial single screw | 45 mm, dedicated PLA/PETG screw geometry |
| Filament diameter | 1.75 mm ±0.03 mm | 1.75 mm die set, optional 2.85 mm / 3.0 mm sets |
| Cooling | Consistent ovality control | Two 3 m water cooling baths with calibration plates |
| Haul-off & winding | Automatic tension control | Caterpillar haul-off + variable speed wind-up station |
| Compliance | CE for import clearance | CE certified machine, CE-compliant control cabinet |
| Lead time | Under 45 days | 30 working days, PE film + wood case packing |
Before shipment the complete line was assembled and trial-run in our Zhangjiagang workshop on the client's own PLA pellets, and a video of the run was sent for approval. After the container arrived, a Friend commissioning engineer attended site for seven days to level the 17 m line, set the die and calibration gap, tune bath temperature and haul-off speed, and train four operators. The client's team was walked through:
Remote support continues over video call and chat, with spare dies and calibration plates held in stock for fast dispatch.
| Metric | Target | Measured After Commissioning |
|---|---|---|
| Output on PLA | 20 kg/h | 20–22 kg/h continuous |
| Diameter tolerance | ±0.03 mm | ±0.02–0.03 mm over 1.75 mm |
| Start-up scrap | Below 5 % | Under 2 % after operator training |
| Line footprint | Fit existing hall | 17 m total length, single operator |
| Shifts running | Two shifts | Two shifts daily, no unplanned stoppage in first 90 days |
With the new line the client brought filament production back in house, doubled usable capacity versus their 8 kg/h machine, and gained the colour consistency their resellers asked for. The CE certificate also cleared import formalities without a single technical query.
This Southeast Asian project shows what a 20 kg/h capacity 3D printer filament machine can deliver when extruder, cooling, haul-off and winding stages are engineered as one line. If you are planning a PLA filament extruder investment — a single 20 kg/h line or a multi-line filament plant — our engineers can size the screw, die and cooling length around your resin, target diameter and certification needs. Send us your filament specification for a line layout and trial-run plan.
In 2026 a 3D printing filament manufacturer based in Southeast Asia placed an order with Friend Plastic Machine (Zhangjiagang Friend Machinery Co., Ltd.) for a 20kg capacity 3D printer filament machine — the FLD-45 single screw PLA filament extruder machine with CE certification. The line was specified for continuous production of 1.75 mm PLA filament feeding the client's own 3D printing consumable brand, with a secondary capability to run ABS, PETG and PA simply by changing the strand die and calibration plates. From deposit to container loading the project was completed in 30 working days, and the line has been running two shifts a day since commissioning at a stable 20–22 kg/h output.
The buyer is a filament and 3D printing consumables supplier serving Southeast Asia's fast-growing desktop 3D printer aftermarket. Their existing single small extruder (around 8 kg/h) could no longer cover demand from local resellers, and outsourced filament was eroding both margin and colour consistency. Their purchasing team set three non-negotiable conditions for the upgrade:
| Parameter | Client Requirement | Friend FLD-45 Solution |
|---|---|---|
| Capacity | 20 kg/h minimum | SJ-45 single screw extruder, 20–22 kg/h on PLA |
| Screw diameter | Industrial single screw | 45 mm, dedicated PLA/PETG screw geometry |
| Filament diameter | 1.75 mm ±0.03 mm | 1.75 mm die set, optional 2.85 mm / 3.0 mm sets |
| Cooling | Consistent ovality control | Two 3 m water cooling baths with calibration plates |
| Haul-off & winding | Automatic tension control | Caterpillar haul-off + variable speed wind-up station |
| Compliance | CE for import clearance | CE certified machine, CE-compliant control cabinet |
| Lead time | Under 45 days | 30 working days, PE film + wood case packing |
Before shipment the complete line was assembled and trial-run in our Zhangjiagang workshop on the client's own PLA pellets, and a video of the run was sent for approval. After the container arrived, a Friend commissioning engineer attended site for seven days to level the 17 m line, set the die and calibration gap, tune bath temperature and haul-off speed, and train four operators. The client's team was walked through:
Remote support continues over video call and chat, with spare dies and calibration plates held in stock for fast dispatch.
| Metric | Target | Measured After Commissioning |
|---|---|---|
| Output on PLA | 20 kg/h | 20–22 kg/h continuous |
| Diameter tolerance | ±0.03 mm | ±0.02–0.03 mm over 1.75 mm |
| Start-up scrap | Below 5 % | Under 2 % after operator training |
| Line footprint | Fit existing hall | 17 m total length, single operator |
| Shifts running | Two shifts | Two shifts daily, no unplanned stoppage in first 90 days |
With the new line the client brought filament production back in house, doubled usable capacity versus their 8 kg/h machine, and gained the colour consistency their resellers asked for. The CE certificate also cleared import formalities without a single technical query.
This Southeast Asian project shows what a 20 kg/h capacity 3D printer filament machine can deliver when extruder, cooling, haul-off and winding stages are engineered as one line. If you are planning a PLA filament extruder investment — a single 20 kg/h line or a multi-line filament plant — our engineers can size the screw, die and cooling length around your resin, target diameter and certification needs. Send us your filament specification for a line layout and trial-run plan.